Amerex Industrial Dry Chemical Extinguishing Systems are pre-engineered package systems and system selection and installation cannot be made without accurate site exploration. The “Industrial Dry Chemical Powder Extinguishing System” design of the detailed exploration is based on “NFPA 17 Standard For Dry Chemical Extinguishing Systems”. Basic requirements in design;
- The system should be able to be actuated automatically by means of the fusible link metal detectors prescribed by the standard and the manufacturer in the field or by a manual pull station to be placed on the escape route
- The system must be mechanically or electrically capable of controlling a valve or critical equipment
- The system should be able to send signals to the central fire detection and notification system
- The system to be installed must be capable of suppressing the fire in the areas where it is applied
- Designed and installed by the engineer authorized by the manufacturer
- An independent system should be implemented for each independent section or area at risk
- The system must be capable of multiple cylinder use
- Each system is a whole in itself and in particular all elements must be the product of the same manufacturer. The system is a whole with all its components and cannot be replaced by another component or a substitute element.
- Available for Local Application and Total Flooding
- In deluge systems, the total unclosable opening cannot exceed 5%
.
Amerex IS Series Industrial Dry Chemical Powder Extinguishing System consists of the following main components.
- Storage Cylinder
- Discharge Valve
- Extinguishing Agent (DCP ABC or BC)
- Cylinder Mounting Bracket
- Mechanical Discharge Device, Contact
- Discharge Nitrogen Cartridge
- Discharge nozzles
- Fusible Link Detectors
- Detection Line
- Corner Pulleys
- Manual Release Station
- Mechanical or Electrical Gas Shut-off Valve
Since most industrial hazards involve many additional hazards and various fuel sources, ABC dry chemical powder is one of the most suitable extinguishing agents for protection against Class A (solid material fires), Class B (flammable liquids) and Class C (electrical). The size of the area is overcome by protecting with multiple cylinder groups and cylinder groups of up to 20 cylinders in total can be controlled via a discharge unit.
Main Features of the System
- Effective in Total Flooding
- Effective in Local Application
- Suitable for ABC or BC Class Fires
- Fast Flame Closure
- Preventing Reignition
- Low Cost Onsite Installation
- Environmentally Sensitive
- Low Filling Cost
Areas of Application
- Flammable and Combustible Warehouses
- Vehicle Paint Booths
- Boiler Rooms
- Generator Rooms
- Fuel Stations
Amerex IS Dry Chemical Powder Extinguishing Systems effectively protect your risks especially in the following special areas.
Local Application: Amerex IS Dry Chemical Powder Fire Extinguishing System allows the protection of a wide range of risks such as Dipping Tanks, Generators, Transformers, Oil Tanks or Solvent Tanks with Local Application method.
Total Flooding: Amerex IS Dry Chemical Powder Fire Extinguishing System provides effective protection for industrial sites with its total flooding option to protect any hazard in the area. In order to talk about total flooding, there must be a closed container or a closed structure. Total Flooding is designed to be used effectively in areas with an opening that cannot be closed below 5% in the area to be extinguished.
Open Front Paint Spray Booth: consists of a filter section and a work area separated by an exhaust duct. The Amerex IS Fire Extinguishing System coverage is a first in the industry, offering protection for an “Open Front Paint Spray Booth” up to 7m high, and the system produced far exceeds the capabilities of other manufacturers’ systems.
Vehicle Paint Spray Booth: Amerex IS Fire Suppression Systems have the most effective Vehicle Spray Booth suppression system on the market. The system protects the entire enclosed space in paint booths where spray-painted vehicles are located with Amerex IS Fire Suppression System, a large number and type of paint spray booth designs are offered as a package. The Amerex IS System offers the most efficient and economical fire protection system available for Painting Booths. It provides protection up to 2,720 ft3 (7070.2m3) with a single total flooding nozzle.
AMEREX IS Dry Chemical Powder Extinguishing Systems are UL and ULC certified.
AKSAY Yangın, in cooperation with AMEREX, provides Design, Preliminary Engineering Calculations, Procurement, Installation-Testing and Commissioning and Contract Maintenance services of IS Dry Powder Extinguishing Systems with its trained engineers and technicians.
