EP 203 Extinguishing Control Panel and Accessories

EP 203 Extinguishing Control Panel and Accessories

EP203 Extinguishing Control Panel consists of 3 detection zones and 1 extinguishing zone. Any of these 3 zones or combinations thereof can be used to activate the alarm condition or to initiate extinguishing.

The event has memory. Holds up to 500 events in memory. Only authorized personnel can view the event memory.

Ep 203 Kontrol Paneli 6
Ep 203 Kontrol Paneli 1
Ep 203 Kontrol Paneli 2
Ep 203 Kontrol Paneli 5
Ep 203 Kontrol Paneli 3
Ep 203 Kontrol Paneli 4

Delay of the extinguishing process in the range of 0-5 minutes can be defined.

LCD screen. The commands given to the panel via the keypad can be followed on the screen. When the panel is in the extinguishing position, the LCD screen changes color and the countdown process is displayed if defined.

EN 12094-1 certified and LPCB approved.

EP203 Extinguishing Control Panel General Features
• Event memory listing status with time
• ort Abort S button to prevent extinguishing from starting
• LCD unit mounted in front of the panel to display system status and programming
• There are two “release buttons başlatan that start the unloading on the front panel and two switches, one for user level adjustment and one for automatic and manual switching.
• There are 3 conventional detection zones continuously monitored by the panel against short circuit and open circuit faults. Any of these 3 zones or combinations thereof can be used to activate the alarm condition or to initiate extinguishing.
• 3 conventional siren zones controlled against short circuit and open circuit faults (2 level 1, 1 level 2)
• 6 monitoring inputs for manual extinguishing, Flow switch, Low pressure, Mode, Hold and Stop terminals
• Auxiliary outputs: General alarm, Regional alarm, Fault, Level 1 and Level 2 alarm
• Supports extinguishing outputs up to 2 solenoid and metron.
• Adjustable extinguishing delay, power supply time and flow time
• Alarm counter
• Relay board for reset, mode, uncharged, hold and stop outputs
• Connection for remote control units with up to 8 system status and start unloading operations
• Buttons and switches in the display section to determine the authorization level of the user

Contact Information

Adress: Perpa Ticaret Merkezi B Blok Kat:11 No: 1829 Okmeydanı / İst.

Sign up for our e-newsletter